Glendale Roof Pros provides professional commercial roofing in Glendale, CA for residential and commercial properties across the Verdugo Valley. Glendale's commercial stock runs from parapeted retail on Brand Boulevard to industrial buildings along San Fernando Road and office and studio space near the 134. Almost all of it is low-slope, and a great deal of it sits within ember reach of the San Rafael Hills.
Rooftop equipment is the standing problem on these buildings. Condensers, exhaust fans, kitchen hoods and later solar racking each add penetrations, and every penetration is a curb, a flashing and a future leak. We inventory the equipment and detail the curbs before pricing any membrane, because that is where the change orders otherwise come from. Solar racking added after a warranty was issued is the most common single cause of a lost warranty.
Systems we install: 60 and 80-mil TPO and PVC, two-ply SBS modified bitumen, and metal retrofit over existing panel roofs. Class A comes from the tested assembly, so the cover board, the insulation and the attachment pattern are named in the specification rather than left to whoever is on the roof that morning. Attachment gets calculated for the building's wind zone rather than copied off the last job, and cover board is not an optional line.
Debris management goes into the maintenance plan instead of being left to chance. Parapet corners, drain sumps, scupper mouths and equipment curbs all collect litter blown off the surrounding slopes, and a quarterly clearing schedule protects the drainage and the fire exposure at once for very little money. We will do the clearing ourselves or train your maintenance crew to do it, and quarterly means quarterly.
Work happens around the tenant. Night and weekend phasing, odour control on hot work, protected walk paths, and a written hot-work permit with a posted fire watch, which matters more here in October than on any calendar. We coordinate with your property manager rather than around them, and the schedule goes in writing. Tenants get written notice before any noisy or odorous phase begins.
Warranties get read out loud before anyone signs. A twenty-year manufacturer no-dollar-limit warranty carries exclusions for ponding, for equipment installed afterward and for missed maintenance. An owner who knows those terms keeps the coverage. One who does not tends to lose it at the first change of an HVAC unit. We would rather you keep a warranty than sell you a longer one.
Our licensed and insured team brings the right materials and equipment to every job — Class A assemblies verified against the listing number, Vents listed to ASTM E2886 for ember resistance, Eighth-inch corrosion-resistant noncombustible mesh, 72-pound mineral-surfaced cap sheet, 26-gauge corrosion-resistant valley flashing, Metal bird stops and eave closures for profile tile — and backs the work with a written workmanship warranty. We serve Glendale and nearby communities including Burbank, Pasadena, La Cañada Flintridge, La Crescenta-Montrose.
What We Handle
Everything our commercial roofing in Glendale covers
One crew, one point of contact, and the full range of commercial roofing work in Glendale, CA. If it is on this list we do it in house rather than handing it to a subcontractor:
- commercial roofing contractor
- commercial roof replacement
- 80-mil TPO
- PVC roofing membrane
- two-ply SBS modified bitumen
- metal retrofit roofing
- equipment curb flashing
- roof drain and sump repair
- NDL warranty roofing
- tenant-occupied reroofing
- roof maintenance program
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Glendale services.
Materials, equipment and how we do commercial roofing
The difference between commercial roofing that lasts and commercial roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with Class A assemblies verified against the listing number, Vents listed to ASTM E2886 for ember resistance, Eighth-inch corrosion-resistant noncombustible mesh, 72-pound mineral-surfaced cap sheet, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Glendale job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the Verdugo Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do commercial roofing outside Glendale
Glendale Roof Pros covers Glendale and the surrounding communities of the Verdugo Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Commercial Roofing in Burbank, CA — Los Angeles, population 107,337
- Commercial Roofing in Pasadena, CA — Los Angeles, population 138,699
- Commercial Roofing in La Cañada Flintridge, CA — Los Angeles, population 20,573
- Commercial Roofing in La Crescenta-Montrose, CA — Los Angeles, population 19,997
- Commercial Roofing in Altadena, CA — Los Angeles, population 42,846
- Commercial Roofing in Sierra Madre, CA — Los Angeles, population 11,268
Start on the Glendale Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Glendale Chooses Glendale Roof Pros
- ✓Every proposal names the tested assembly and its listing, never only a shingle brand name
- ✓Vent inventory on each inspection: opening size, mesh gauge and ember-resistance listing
- ✓Tile eave and rake closures installed in metal, never packed mortar that cracks out again
- ✓26-gauge valley metal over a mineral-surfaced cap sheet on every hillside slope we touch
The standards behind commercial roofing
Quality here is not a matter of opinion — it is written down. The commercial roofing work we do in Glendale follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every commercial roofing project in Glendale gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free commercial roofing free estimate in Glendale, or request a quote and we'll get right back to you.